Futaba Servo S9570SV Low-Profile MG BB 0,08s/8,0kg

SKU: P-S9570SV

Manufacturer: Futaba

Category: Servos

Not available!

99,99 €

incl. 19% VAT , plus Delivering to:

Description

Powerful S.BUS2 low-profile digital servo with metal gearbox. The servo is mainly used in the RC car sector as a fast steering servo for electric on- and off-road RC cars.

Programmable through S.BUS2 technology. Of course, all S.BUS2 servos can be connected to conventional receivers with PWM modulation. The servos can be addressed in various ways:
1. via the S.BUS receiver
2. with the handy SBC-1 programmer
3. on the PC with the CIU-3 USB adapter
4. at the S.BUS connection of the transmitter

THE FOLLOWING PARAMETERS CAN BE SET:

S.BUS channel assignment
Servo reverse polarity
Servo type (Normal / Retract)
Soft start (On / Off)
Mode selection in case of signal failure Hold or Free
Soft servo run (On / Off)
Servo position (servo tester)
Servo centre adjustment +/- 300 µs (approx. 30 degrees)
Servo speed, 0.39...9 seconds per 45 degrees
Deadband adjustment (deadband)
Servo travel adjustment, left and right separately, approx. 50...175
Starting power
Damping
Holding force
ID storage

TECHNICAL DETAILS:

Actuating speed 60°: 0.08 / 0.09 s (7.4 / 6.6 V)
Positioning torque: 8.0 / 7.2 kgcm (7.4 / 6.6 V)
Operating voltage: 4.8 - 8.4 V
Control frequency: 50 - 300 Hz
Weight: 43 g
Dimensions: 41 x 20 x 25 mm

FEATURES:

Powerful S.BUS2 low-profile digital servo with metal gears
Hi-Voltage
Coreless motor
Low-profile design
Ball bearing
Robust plastic housing
Low-wear potentiometer
High resolution
High positioning accuracy

Application:	Drift Offroad Onroad
Size:	Low-profile
Geartype:	Metal
Torque [kg/cm]:	5-10
Supply voltage [V]:	4.8-6 > 6V > 7V
Speed:	fast very fast
Shipping weight:	0,11 kg

CAUTION: Not suitable for children under 14 years. To be used under the direct supervision of an adult.